Oce VarioLink 2221 - Changing the Settings of the Fax Program

9
Specifying settings using Web Connection
9-38 VarioLink 2221/2821/3621
Changing the settings of the fax program
1 Click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
2 Click [FAX Program Registration].
3 From the "Index" list, click the index that contains the fax program that
is to be changed.
The one-touch dial destinations saved in the selected index appear in
the lower half of the page.
4 Click the fax program that is to be changed.
– A one-touch dial destination other than a fax program cannot be
selected, even if it is clicked.
5 Specify settings for the program parameters.
– For details on the parameters, refer to "FAX Program Registration
(User mode)" on page 9-33.
6 Click [Apply].