Specifying management settings
10
VarioLink 2221/2821/3621 10-43
Specifying DNS query timeout setting (mode 367)
You can specify the time until a timeout of the DNS server connection
occurs.
Factory settings
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 1 0 0 0 0 0 (HEX: 20)
Bit Description Setting Description Page
Refer-
ence
7, 6, 5, 4,
3
Specifies the time until a
timeout of the DNS server
connection occurs.
00001 20 seconds ---------
00010 40 seconds
00011 80 seconds
00100 160 seconds
10101 320 seconds
00110 640 seconds
Other *Do not specify other set-
tings than the above.
2, 1, 0 -----------------------------
000 *Do not change these bits
when specifying settings for
this function.
---------