Oce VarioLink 2221 - Page 372

10
Specifying management settings
10-24 VarioLink 2221/2821/3621
6 Select whether to enable document
management.
– If "YES" is selected in the
Document Management screen,
specify the processing method
for received documents.
7 Specify the processing method for
received documents.
– Touch [RX Doc. Settings], select
the processing method, and then
touch [Enter].
8 Specify the forwarding destination if
"Forward" is selected in the Setting
of RX Doc. screen.
– To add a new forwarding
destination, touch [Next
Destination].
– To view the details of the
forwarding destinations, touch
[Forward], and then touch
[Detail].
– To delete a forwarding destination, touch [Forward], and then touch
[Delete].
9 Touch [Enter] until the initial screen appears.