9
Specifying settings using Web Connection
9-24 VarioLink 2221/2821/3621
5 Select the communication mode, and then click [Next].
– If mode 476 of the software switch settings was changed, only
communication modes that can be selected appear. For details,
refer to "Specifying software switch settings (machine functions)"
on page 10-28.
6 Specify settings for the parameters in the page for the selected
communication mode.
– To also register the secondary recipient, specify settings for the
parameters, and then click [Sub Address Registration].
– For details on the parameters, refer to "One-Touch Key Registration
(User mode)" on page 9-14.
7 Click [Apply].
The one-touch dial destination is registered.
To Next Page
Loading...
