9
Specifying settings using Web Connection
9-72 VarioLink 2221/2821/3621
Note
If bit 7 of mode 466 is set to "1" in the Soft SW Setting screen, select
"GSS-SPNEGO" beside "Authentication Setting". For details on the
software switch settings, refer to "Specifying software switch settings
(machine functions)" on page 10-28.
If bit 7 of mode 466 is set to "1" in the Soft SW Setting screen, the
information entered beside "Login Name" and "Password" is used when
checking the connection. For details on the software switch settings,
refer to "Specifying software switch settings (machine functions)" on
page 10-28.
To Next Page
Loading...
