OmniPod 5 - Editing a Temp Basal Preset

Temporary Basal Rates and Presets 7
100
7 Temporary Basal Rates and Presets
7. Tap the Duration eld and scroll to a duration for the preset. e temporary
change to the Basal Programme is shown on the graph.
8. Tap CONFIRM.
9. Review the temp basal details. If corrections are needed, tap on the row to
change. en enter your corrections and conrm them.
10. Tap SAVE to save this as a temp basal preset.
11. If you would like to start this temp basal now, tap START. Otherwise, tap NOT
NOW.
7.5. Editing a Temp Basal Preset
Note: You cannot edit a temp basal preset that is in progress.
To edit a temp basal preset:
1. Navigate to the Temp Basal Presets screen:
Menu button (
) > Temp Basal Presets
2. Find the preset that you want to edit. en tap the Options button ( ) and
tap Edit.
3. To rename the preset, tap the Preset Name eld and enter the new name.
4. Tap DONE.
5. Tap NEXT.
6. Change the basal rate and duration as desired.
7. Tap CONFIRM.
8. Review the temp basal details. If corrections are needed, tap on the row to
change. en enter your corrections and conrm them.
9. Tap SAVE to save your changes.
10. If you would like to start this temp basal now, tap START. Otherwise, tap NOT
NOW.