OmniPod 5 - Informational Sounds and Vibrations; Programme Reminders

Alarms, Action and Reminder Notications 13
148
13 Alarms, Action and Reminder Notications
13.4. Informational Sounds and Vibrations
Caution: AVOID setting your Controller to Silent, Vibrate or any other
setting that prevents you from hearing alarms and notications from your
Omnipod 5 App. If you do not hear alarms and notications from your
Controller, you might not make the changes you need to make to your
insulin therapy in a timely manner. Your Pod will still sound, and you will
be able see the Alarm or Notication displayed on the Omnipod 5 App.
See “13.3. Sounds and Vibrations” on page 147 to learn how to manage
sounds and vibrations.
e Pod and the Omnipod 5 App can provide informational sounds (tones,
beeps) or vibrations to let you know that normal activity between the Pod and the
Omnipod 5 App is occurring as expected. See the tables below for descriptions of
informational sounds you will encounter during use.
Condence reminders
Cause Omnipod 5 App Pod
Tones or vibrations let
you know that your
temp basals and boluses
are working as expected.
ese reminders are
ON by default. To
turn them ON or
OFF, see “Condence
Reminders” on page 122.
Tone/vibration at the
start of a temp basal,
bolus or extended bolus.
Beeps once at the end
of a temp basal, bolus or
extended bolus.
Note: Condence reminders and programme reminders are turned on by
default. ese reminders cause the Omnipod 5 App or Pod to beep at the
beginning and end of boluses and temp basals, and also once an hour during
an extended bolus or temp basal. For more information, see “Condence
Reminders” on page 122.
Programme reminders
Cause Omnipod 5 App Pod
Beeps remind you that
you have a temp basal or
extended bolus running.
ese reminders are
ON by default. To turn
them ON or OFF, see
page 122.
No tone/vibration Beeps once every
60 minutes while a temp
basal or extended bolus
is running.