OmniPod 5 - Temp Basal Settings: Units Per Hour (U;Hr) or Percentage (%)

Temporary Basal Rates and Presets 7
102
7 Temporary Basal Rates and Presets
Temp basal settings: Units per hour (U/hr) or percentage (%)
Temp basals can be set using a percentage (%) or units per hour (U/hr).
Setting temp basals to units per hour (U/hr) means that the Pod delivers insulin
at a at rate for the duration of the temp basal. In other words, the details of the
currently scheduled Basal Programme are ignored during these temp basals.
Setting temp basals to a percentage (%) means that insulin delivery follows the
pattern dened by the currently scheduled Basal Programme, but increases or
decreases the insulin delivery by the specied percentage. For example, a 50%
increase raises the Basal Programme's insulin delivery by 50%, while a 50%
decrease lowers the Basal Programme's insulin delivery by 50%.
Temp basal from 7 AM to 4:30 PM
Basal Programme
Actual insulin delivered
12 AM 12 AMNoon
0
0.2
0.4
0.6
0.8
1.0
12 AM
Noon
12 AM
Basal Rate (U/hr)
50% decrease
50% increase
Temp basal set to %
12 AM 12 AMNoon
0
0.2
0.4
0.6
0.8
1.0
12 AM
Noon
12 AM
Basal Rate (U/hr)
set to 0.1 U/hr
set to 0.9 U/hr
Temp basal set to U/hr