OmniPod 5 - Personalise Your Controller; Setting the PIN on Your Controller; Setting up Your Controller

Setting Up Your Omnipod5 Application 4
58
4 Setting Up Your Omnipod5 Application
Setting Up Your Controller
Warning: ALWAYS identify the Omnipod 5 App as yours before using it.
Using someone else's Omnipod 5 App can result in incorrect insulin delivery for
both of you.
Personalise your Controller
Follow the steps below to personalise your Controller.
1. Enter a personalised screen message (at least two characters), tap Done, then
tap CONTINUE.
A screen appears showing several background images.
2. Swipe right or le to see more images. Tap on your preferred image, then tap
CONTINUE.
Note: When you wake up your Controller, you will see your personalised screen
message and background image. Always conrm that the Controller is yours
before using it.
Setting the PIN on your Controller
To protect against unintended use or screen touches, you must create a 4-digit
personal identication number or PIN.
To set a PIN:
1. Choose 4 numbers to be your PIN. You
will use this PIN every time you wake
up your Controller. You may want to
record the PIN in a safe place.
Tip: To keep the PIN visible, tap the
eye icon located to the right of the PIN
entry elds. To hide the number, tap the
eye icon again.
2. Tap a eld to display the number pad.
Enter your 4-digit PIN. Tap Done.
3. Enter the same 4 numbers again to conrm your PIN. Tap Done.
If the second PIN entry does not match the rst, you must repeat the above steps.