OmniPod 5 - Language; Reminder Settings; Reset

Changing Settings 10
120
10 Changing Settings
Language
To change your preferred language:
1. Navigate to: Menu button ( ) > Settings > General > Language.
2. Select the language you would like to use for your Omnipod 5 App.
3. Tap SAVE.
4. e screen will ash briey. e App will relaunch in the selected language.
Changing the language will NOT reset your settings, history or adaptivity.
Reset
Caution: DO NOT reset the Omnipod 5 App before checking with your
healthcare provider. is will erase all of your settings, Adaptive Basal Rate and
history, and require you to change your active Pod. Before resetting, make sure
you have a current record of your settings and a new Pod with supplies to use
when restarting the app.
If you need to reset the Omnipod 5 App on your Controller, which will clear all
your settings and history, follow these three steps.
1. Navigate to: Menu button ( ) > Settings > General > RESET.
2. If you have an active Pod, deactivate and remove your Pod.
Note: While a Pod will continue delivering insulin into your body aer an
App reset, you will not be able to reconnect to this Pod to deliver a bolus or
deactivate it later. Remove it and be ready to activate a new Pod.
3. Tap Clear all data.
4. Tap CONFIRM.
5. You will need to complete rst-time set-up again. Follow the steps in Chapter
4 to set up your Omnipod 5 App.
10.2. Reminder Settings
Caution: AVOID setting your Controller to Silent, Vibrate or any other setting
that prevents you from hearing alarms and notications from your Omnipod
5 App. If you do not hear alarms and notications from your Controller, you
might not make the changes you need to make to your insulin therapy in a
timely manner. Your Pod will still sound, and you will be able see the Alarm
or Notication displayed on the Omnipod 5 App. See "13.3. Sounds and
Vibrations" on page 147 to learn how to manage sounds and vibrations.