OmniPod 5 - Turning on and Signing in to Your Controller

Setting Up Your Omnipod5 Application 4
56
4 Setting Up Your Omnipod5 Application
Turning On and Signing in to Your Controller
Caution: Connect ONLY to trusted Wi-Fi networks with your Controller.
AVOID connecting to public Wi-Fi networks, such as those found in airports,
coee shops, etc., as these networks are not secure and could result in exposing
your Controller to malware. DO NOT connect to public Wi-Fi networks during
rst-time set-up of your Omnipod 5 System.
1. Press and hold the Power button on the right side until the device
manufacturer logo appears.
2. Select your language.
3. e Controller runs through a series of checks. If prompted, allow
permissions and connect to Wi-Fi. See page 166 for more details.
Note: e SIM Card on your Omnipod 5 Controller enables data to be sent
and received via a mobile network when your Controller is not connected to a
Wi-Fi network. If you stop using the Omnipod 5 App over a mobile network
on your Controller, Insulet may deactivate the SIM Card. Please note that the
Controller is still functional using Wi-Fi. If you return to using the Omnipod5
App on your Controller aer a signicant period of time, please contact
Customer Care to request SIM card reactivation for full coverage via both the
mobile network and Wi-Fi. Upon request, the SIM card is reactivated.
4. Sign in with your Omnipod ID:
a. Enter your username.
b. Enter your password.
c. Tap SIGN IN.
Tip: e username and password are case-sensitive.