OmniPod 5 - Cancel a Bolus; Cancelling a Bolus in Progress; Deliver a New Bolus before an Extended Bolus Has Ended

209
Delivering a Bolus 1616 Delivering a Bolus
16.4. Cancelling a Bolus in Progress
When an immediate bolus is in progress, you must cancel it or allow it to nish
before performing any other action.
During an extended bolus, you can use your Omnipod 5 System normally, except
that the Bolus button will be disabled (greyed out), preventing you from delivering
an additional bolus. You have the options to:
• Cancel the bolus.
• Cancel the bolus in progress and then deliver another bolus.
If you get a communication error message when cancelling a bolus, see “Error
when cancelling a bolus” on page 324.
Cancel a bolus
To cancel an immediate or extended bolus:
1. On the Home screen (immediate bolus) or the Home screen's DASHBOARD
tab (extended bolus), tap CANCEL.
2. Tap YES to conrm cancelling the bolus. e Pod beeps to conrm that the
bolus is cancelled.
Tip: To see how much insulin was delivered from a bolus, go to: Menu button
(
) > History Detail > Summary. For more information, see “Immediate and
extended boluses” on page 135
Deliver a new bolus before an extended bolus has ended
To deliver a bolus while an extended bolus is in progress:
1. Cancel the extended bolus as described in the previous procedure, “Cancel a
bolus”.
2. Find out how much insulin was remaining (not delivered) from the cancelled
bolus. You can nd bolus details at Menu button (
) > History Detail >
Summary.
3. From the Bolus screen, enter the carbs and glucose (or USE SENSOR)
information.
4. Optional: take into consideration the amount remaining from the cancelled
bolus and add the amount in the Total Bolus eld.
5. Check if the amount entered in the Total Bolus eld is correct. en tap
CONFIRM.
6. Tap START.