OmniPod 5 - 7 Temporary Basal Rates and Presets; 7.1. About Temporary Basal Rates; 7.2. Starting a Temp Basal; 7.3. Cancelling a Temp Basal or Temp Basal Preset

87
Activating and Changing Your Pod 55 Activating and Changing Your Pod
If you observe any problems with the Pod, deactivate the Pod and activate a new
one.
Additional Information
Tip: Develop a routine so you can change your Pod at a convenient time. If you
know of an upcoming event that could interfere with changing your Pod, you can
change your Pod early to avoid a disruption in insulin delivery.
For additional information on using your Pods as eectively as possible, see the
following sections:
• To learn about caring for your Pod, see “14.1. Pod and Insulin Storage and
Care” on page 178.
• To learn about the Pod alarms, see page 143.
• To learn how to silence a Pod alarm (see “13.9. Silencing Unresolved Alarms”
on page 173).
• To understand the Pod's informational and notication beeps, including
which beeps are optional, see “13.11. Reminder Notications List” on page 175
and “13.4. Informational Sounds and Vibrations” on page 148.
• To understand how to handle situations where the Omnipod 5 App cannot
communicate with your Pod, see “26.5. Pod Communication Issues – “Try
Again”” on page 323.
• If the Home: POD INFO tab says “No Pod Communication”:
• To nd the last time the Omnipod 5 App successfully communicated with
the Pod, navigate to: Menu button (
) > Pod.
• If you are unable to restore communication with the Pod and want to
change to a new Pod, navigate to: Menu button (
) > Pod > CHANGE
POD.