OmniPod 5 - Flight Mode; General Settings; Network Connectivity

Changing Settings 10
116
10 Changing Settings
10.1. General Settings
Warning: DO NOT start to use your system or change your settings without
adequate training and guidance from your healthcare provider. Initiating and
adjusting settings incorrectly can result in over-delivery or under-delivery of
insulin, which could lead to hypoglycaemia or hyperglycaemia. Settings that
impact insulin delivery mainly include: Pod Shutdown, basal rate(s), Max Basal
Rate, Max Bolus, Correction Factor(s), Insulin to Carb (IC) Ratio(s), Minimum
Glucose for Calculations, Target Glucose, Correct Above and Duration of
Insulin Action.
Network Connectivity
Flight Mode is a device setting that turns o mobile phone and Wi-Fi network
connectivity. Flight Mode can be turned ON or OFF.
Note: ough the Omnipod 5 System does not require constant network
connectivity, frequent connectivity (either mobile phone or Wi-Fi) is needed for
optimal use of the system, such as if you typically share your glucose data with a
care partner. Consider re-enabling Wi-Fi aer turning on Flight Mode for optimal
system use.
Flight mode
To turn Flight Mode ON or OFF on the Controller:
1. Navigate to: Menu button ( ) > Settings > General.
2. Tap the Flight Mode toggle to turn Flight Mode ON or OFF.