OmniPod 5 - Device Time Zone; Pin; Time Change

Changing Settings 10
118
10 Changing Settings
PIN
To change your personal identication number or PIN:
1. Navigate to: Menu button ( ) > Settings > General > PIN.
2. Enter your current PIN.
3. Enter the new four-digit PIN.
Tip: Tap the eye icon to display or hide the PIN.
4. Tap Done to accept the PIN.
5. Re-enter the new PIN, and then tap Done.
Note: To change your PIN, you must have mobile or Wi-Fi connectivity.
Note: If you have problems with your PIN, contact Customer Care. For contact
information, see the Customer Care card at the front of this User Guide.
Time Change
Caution: AVOID turning Automatic Time Zone OFF on the Controller. If you
turn Automatic Time Zone OFF, your Controller will not be able to detect when
your device time zone and insulin delivery time zone do not match. Delivering
insulin based on a dierent time zone than your local time could cause errors
in insulin delivery and data logging, which could lead to hypoglycaemia or
hyperglycaemia.
A time change occurs when you are travelling to a dierent time zone or for
daylight savings time. To help you manage time changes, your device’s time zone is
separate from your insulin delivery time zone, as described in the table below.
Omnipod 5 App
on:
Device Time
Zone
Insulin Delivery
Time Zone
Automatic Time
Zone Setting:
ON/OFF
Controller Time shown on
your Controller
(status bar, lock
screen)
Time shown in
the Omnipod
5 App, insulin
delivery is based
on the App time
Recommended
ON
Device time zone
Your device time zone is the time displayed outside of the Omnipod 5 App on
the status bar and the lock screen. Your device time will update automatically
when you travel to a new time zone or for Daylight Saving Time when you have
the Automatic Time Zone setting ON. It is recommended that you keep your
Automatic Time Zone setting ON so your device time zone will always be your
local time zone.