OmniPod 5 - Disconnecting the Transmitter from the Pod

258
20 Connecting DexcomG6to the Pod
If you do not have an active Pod or you are changing your Pod, the Transmitter
serial number (SN) will be saved and sent to the next Pod that is activated.
20.4. Disconnecting the Transmitter from the Pod
To stop the Pod from communicating with the Transmitter, delete the SN. If you
delete the SN, you will no longer be able to enter Automated Mode until a new
Transmitter SN is added.
To delete the SN:
1. From the Home screen, tap the Menu button ( ) > Manage Sensor.
e Manage Sensor screen displays the saved SN.
2. Tap DELETE.
3. Tap OK, DELETE to conrm.