Omron RX Series - Page 126

3 Operation and Test Run
3 - 10
High-function General-purpose Inverter 3G3RX-V1 User’s Manual (I578-E1)
If the parameter number or data is far away from the current value on the display, using the individual
input mode is efficient for changing the parameter data.
In the individual input mode, you can change the parameter number or data by selecting and entering a
value digit by digit.
The following is an example of changing the monitor mode parameter number d001 on the display to
the extended function parameter number A029.
(1) Display the monitor mode parameter number.
(“d001” is displayed.)
Individual Input Mode (Direct Input or Selection)
Press and simultaneously.
Step1:
The most significant
digit is blinking.
Step2: Step3:
Moves to left. Moves to right.
–1
+1
Press the Increment key
and Decrement key
simultaneously.
Enter when the least
significant digit blinks.
Move blinking digit to left and right with
the Mode and Enter keys to change
numbers with the Increment/Decrement
keys.