Omron RX Series - Page 509

8 - 33
8 Communications Functions
High-function General-purpose Inverter 3G3RX-V1 User’s Manual (I578-E1)
8-5 Modbus Communication Register Number List
8
8-5-2 Monitor Function/Enter Command Register List
Note 1 The inverter’s rated current is 1,000.
2 When the set value is 10,000 (100.0 s) or more, the value in the second decimal place is ignored.
3 The time information used for register No. 0051 hex to 006C hex is enabled when the LCD Operator is connected.
Register
No.
Modbus
register
spec. No.
Function name
Parameter
No.
R/W Monitor or setting data Resolution
006A hex 0069 hex
Fault Monitor 6 Detection
Ye a r
d086 R
Year in which error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
006B hex 006A hex
Fault Monitor 6 Detection
Date
d086 R
Date (month and day) at which
error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
006C hex 006B hex
Fault Monitor 6 Detection
Date
d086 R
Time (o’clock and minutes) at
which error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
006D to
08FF hex
006C to
08FE hex
Not used – – –
0900 hex 08FF hex
Enter command
(Write to EEPROM)
–W
0000: Motor parameter
recalculation
0001: Set value storage in
EEPROM
Other: Motor parameter
recalculation and Set
value storage in EEPROM
–
0901 to
1000 hex
0900 to
0FFF hex
Not used – – –