Omron RX Series - Page 508

8 Communications Functions
8 - 32
High-function General-purpose Inverter 3G3RX-V1 User’s Manual (I578-E1)
Note 1 The inverter’s rated current is 1,000.
2 When the set value is 10,000 (100.0 s) or more, the value in the second decimal place is ignored.
3 The time information used for register No. 0051 hex to 006C hex is enabled when the LCD Operator is connected.
Register
No.
Modbus
register
spec. No.
Function name
Parameter
No.
R/W Monitor or setting data Resolution
0058 hex 0057 hex
Fault Monitor 2 Detection
Date
d082 R
Time (o’clock and minutes) at
which error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
0059 to
005A hex
0058 to
0059 hex
Not used – – –
005B hex 005A hex
Fault Monitor 3 Detection
Year
d083 R
Year in which error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
005C hex 005B hex
Fault Monitor 3 Detection
Date
d083 R
Date (month and day) at which
error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
005D hex 005C hex
Fault Monitor 3 Detection
Date
d083 R
Time (o’clock and minutes) at
which error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
005E to
005F hex
005D to
005E hex
Not used – – –
0060 hex 005F hex
Fault Monitor 4 Detection
Year
d084 R
Year in which error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
0061 hex 0060 hex
Fault Monitor 4 Detection
Date
d084 R
Date (month and day) at which
error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
0062 hex 0061 hex
Fault Monitor 4 Detection
Date
d084 R
Time (o’clock and minutes) at
which error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
0063 to
0064 hex
0062 to
0063 hex
Not used – – –
0065 hex 0064 hex
Fault Monitor 5 Detection
Year
d085 R
Year in which error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
0066 hex 0065 hex
Fault Monitor 5 Detection
Date
d085 R
Date (month and day) at which
error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
0067 hex 0066 hex
Fault Monitor 5 Detection
Date
d085 R
Time (o’clock and minutes) at
which error was detected
(Enabled when LCD Digital
Operator is connected)
BCD
0
068 to
0069 hex
0067 to
0068 hex
Not used – – –