Setting Measurement Items
126
ZW-7000/5000
User's Manual
Multi View Explorer : [BankGroup] | [(Bank Data Name)] (double click)
→ Edit pane : [Task Settings] icon ( )
→ Task Settings window : [Measurement mode]
Item Setting item Setting value Description
Height settings Measurement
surface
Edge1/Edge2/Edge3/Edge4/
peak (default value)
The measurement surface targeted for measurement can
be switched.
The peak is the surface of all measu
rement surfaces having
the highest received light amount.
1
Select [Height] in [Measurement mode].
2
Select the measurement surface targeted for
measurement from [Measurement surface].
• Height measurement can also be set by the operating keys on the Sensor Controller.
Measuring the Height p.212
• For the setting of measurement area to control of light adjustment, refer to the following:
Setting Light Exposure Time Control Mode p.121
Note
To Next Page
Loading...
