Omron ZW-7000 Series - Page 197

Search from Menu Tree
ZW-7000/5000
User's Manual
195
Sensor controller operations
7
Setting Option/Setting Range Pages
System
setting
[SYS
TEM]
Communications
[COM]
RS-232C
[RS232C]
Data length
[DATA]
7bit [7BIT]/8bit [8BIT]*
*1
(cont'd) (cont'd)
Parity
[PARITY]
None [OFF]*/Odd [ODD]/
Even [EVEN]
Stop bit
[STOP]
1bit [1BIT]*/2 bit [2BIT]
Baud rate
[BAUD.RT]
9600/19200/38400*/57600/115200
CS/RS
[CS/RS]
Off [OFF]*/On [ON]
Ethernet
[ETN]
IP address 1
[IPADDR]
[IP1]
1 to 233 (default value: 192)
*2
IP address 2
[IP2]
0 to 255 (default value: 168)
IP address 3
[IP3]
0 to 255 (default value: 250)
IP address 4
[IP4]
1 to 254 (default value: 50)
Subnet mask1
[SUBNET]
[SUB1]
0 to 255 (default value: 255)
Subnet mask2
[SUB2]
0 to 255 (default value: 255)
Subnet mask3
[SUB3]
0 to 255 (default value: 255)
Subnet mask4
[SUB4]
0 to 255 (default value: 0)
Protocol
selection
[PROTCL]
Off [OFF]/ TCP/Server [TCP.SV]*/
TCP/
Client
[TCP.CL]/UDP [UDP]
Output IP
add
ress 1
[OU
TIP]
[IP1]
1 to 233 (default value: 192)
Output IP
address 2
[IP2
]
0 to 255 (default value: 168)
Output IP
address 3
[IP3
]
0 to 255 (default value: 250)
Output IP
address 4
[IP4
]
1 to 254 (default value: 100)
Port numbers
[PORT.IN]
0 to 65535 (default value: 9601)
Output
destinat
ion
port No.
[PORT.OT]
0 to 65535 (default value: 9601)
Delimiter
[DELIMI]
Delimiter
[DELIMI]
CR
[CR] */LF [LF]/CR+LF [CRLF]
*1
Fieldbus
[MEMLINK]
Fieldbus
[MEM.LINK]
Off [OFF]/ EtherNet/IP [EIP]/
EtherCAT [E-CAT]*
−
GATE signal
ON time
[GATE.TM]
GATE signal
ON
[GATE.TM]
0 to 100 (default value: 1)
−
*1. For more detail, refer to the following.
5-1 Connecting by No-protocol Communications in Confocal Fiber T
ype Displacement Sensor User's Manual for
Communications Settings (Cat. No.Z363).
*2. For more detail, refer to the following.
4-1 Connecting with EtherNet/IP in Confocal Fiber Type Displaceme
nt Sensor Use
r's Manual for Communications
Settings (Cat. No.Z363).
*3. For more detail, refer to the following.
2-1 Parallel I/O Connection in Confocal Fiber Type Displacement
Sensor
User's Manual for Communications Settings
(Cat. No.Z363).