Switching operation modes
200
ZW-7000/5000
User's Manual
Entering Numerical Values
To enter numerical values, including parameters, for the sub-display, follow the steps below:
(1) When entering numerical values, the sub-display displays the current setting value and its uppermost digit
flas
hes.
(2) Press the / keys to select a digit to enter a number.
Press the key on the rightmost digit to move blinking to the leftmost digit.
Press the key on the leftmost digit to move blinking to the rightmost digit.
(3) Press the / keys to select a digit to enter a number.
(4) Press the key to apply the entered value.
Positioning decimal point
To position a decimal point, follow the steps below:
(1) If a decimal point has been defined, it flashes on the sub-display.
(2) Press the / keys to position the decimal point.
Position the decimal point at the rightmost digit to erase it.
Press the key on the rightmost digit to move blinking to the leftmost digit.
Press the key on the leftmost digit to move blinking to the rightmost digit.
(3) Press the key to apply the position of the decimal point.
Apply
Select
digit
Sub-display
(Parameter)
Select
value
Apply
Select
position
Sub-display
(Parameter)
To Next Page
Loading...
Need help?
General
