Omron ZW-7000 Series - Page 268

Specifications and External Dimensions
266
ZW-7000/5000
User's Manual
External I/F Ethernet 100BASE-TX/10BASE-T, Non-procedure (TCP/UDP), EtherNet/IP
EtherCAT EtherCAT exclusive protocol 100BASE-TX
RS-232C Max. 115,200 bps
Analog
output
terminal
block
Analog voltage output
(OUT V)
-10 V to +10 V, output impedance: 100 Ω
Analog current output
(OUT A)
4 mA to 20 mA, max. load resistance: 300 Ω
32-pole
expansion
connector
Judgment output
(HIGH/PASS/LOW)
Transistor output system
Output voltage: 21.6 to 30 VDC
Load current: 50 mA or less
Residual voltage when turning ON: 2 V or less
Leakage voltage when turning OFF: 0.1 mA or less
Busy output (BUSY)
Alarm output (ALARM)
Enable output
(ENABLE)
Sync flag output
(SYNFLG)
Trigger busy output
(TRIGBUSY)
Logging state output
(LOGSTAT)
Logging error output
(LOGERR)
Stability output
(STABILITY)
Task state output
(TASKSTAT)
LIGHT OFF input
(LIGHT OFF)
DC input system
Input voltage: 24 VDC ± 10% (21.6 to 26.4 VDC)
Input current: 7 mA Type. (24 VDC)
ON voltage/ON current: 19 V/3 mA or less
ON voltage/ON current: 5 V/1 mA or less
Zero reset input
(ZERO)
Timing input (TIMING)
Reset input (RESET)
Sync input
(SYNC)
Trigger input
(TRIG)
Logging input
(LOGGING)
Bank Currently
selected
bank output
(BANK_OUT
1 to 3)
Transistor output system
Output voltage: 21.6 to 30 VDC
Load current: 50 mA or less
Residual voltage when turning ON: 2 V or less
Leakage voltage when turning OFF: 0.1 mA or less
Bank
Selection
input
(BANK_SEL
1 to 3)
DC input system
Input voltage: 24 VDC ± 10% (21.6 to 26.4 VDC)
Input current: 7 mA Type. (24 VDC)
ON voltage/ON current: 19 V/3 mA or more
OFF voltage/OFF current: 5 V/1 mA or less
Item Specifications
ZW-7000 @ ZW-5000 @