Omron ZW-7000 Series - Page 34

Basic Operations for Displaying Measurement Results
32
ZW-7000/5000
User's Manual
For Windows 7
By default, the Sensor Controller has an IP address of 192.168.250.50 and a subnet mask of 255.255.255.0. In this
case, the network address is 192.168.250.0 and so specify 192.168.250. ** Default IP address of Sensor Controller
is 192.168.250.50 and sub mask is 255.255.255.0. Since the network address is 192.168.250.0, specify
192.168.250.** (**=2 to 254 except 50.) to the IP address of your PC. for the IP address of the personal computer.
1 Select [Control Panel] from the start menu.
The [Control Panel] dialog box appears.
2 Click [Network and Internet], and [View net-
work status and tasks].
3 Click [Change adapter settings].
4 Right-click [Local Area Connection] and se-
lect [Properties] from the displayed menu.
The [Local Area Connection Properties] dialog
b
ox appe
ars.
Note