CHAPTER 9
Connect the Internal Cables
Connect the Internal Cables
The internal cables are shipped with the Oracle FS System. Ethernet cables
support the private management interconnect (PMI). A serial cable establishes
the backup heartbeat path for the Pilots. SAS cables support the Backend SAS
Interconnect.
Prerequisites:
• You unpacked the cables and the power cords from the shipping cartons.
• You are familiar with the labels on each end of the cables shipped with the
Oracle FS System.
• You supplied an Ethernet CAT6a cable for connecting the Pilot to the
customer management network.
• The cable management arms (CMAs) are installed on the Pilots and the
Controllers.
Before you begin connecting the internal cables for the Oracle FS System, verify
that you have the following cables unpacked from the shipping cartons and
organized so that you can easily identify them as you cable the system:
•
Three blue Ethernet CAT6a cables used to connect the Pilot nodes.
•
Two red Ethernet CAT6a cables used to connect the Pilot nodes to the
Controller nodes.
•
Three green Ethernet CAT6a cables used to connect the Controller internal
connections.
•
One black serial RJ45 rollover cable used to establish the backup heartbeat
path for the Pilots.
•
Mini-SAS high density (HD) to mini-SAS HD cables used establish the SAS
connections between the Controller nodes. The number of cables included
in the shipment depends upon the conguration of the system.
139
To Next Page
Loading...
Need help?
General