Related Links
Remove a Side Panel From a Rack
Remove the Doors From a Rack
Remove the Doors From a Rack
Remove the rack doors to make the placement of the components easier.
1 If locked, unlock the front and back doors of the rack.
2 Release all door hinges, as well as any grounding straps.
Figure 11: Rack door removal
Legend
1 Ground strap
2 Rack door hinge
Note: This is an example of removing the doors from a rack. Your rack may
dier from the illustration. Consult the rack vendor's documentation for
details on removing doors and ground straps.
3 Remove the doors and set them aside.
Note: Use care to place the doors where they cannot fall on people or slide
and cause injury.
Important: After installing an Oracle FS System, shut all the doors, re-aach the
ground straps to maintain compliance with applicable emissions requirements.
Remove a Side Panel From a Rack
You might be required to remove the rack side panels to have sucient space to
perform service actions such as replace components or cable Drive Enclosures.
Prepare for System Installation
44
To Next Page
Loading...
Need help?
General