Oracle FS1-2

a) Connect the end of the cable labeled “DE-2 IOM0-2” to I/O module 0,
port 2 on Drive Enclosure 2.
b) Connect the other end of the cable, labeled “DE-5 IOM0-0,” to I/O
module 0, port 0 on Drive Enclosure 5.
7 Cable Drive Enclosure 3 to Drive Enclosure 5.
a) Connect the end of the cable labeled “DE-3 IOM1-2” to I/O module 1,
port 2 on Drive Enclosure 3.
b) Connect the other end of the cable, labeled “DE-5 IOM1-0,” to I/O
module 1, port 0 on Drive Enclosure 5.
Related Links
Drive Enclosure Cabling
Build Map for Your Oracle FS System
Drive Enclosure Wiring Diagrams
Example of Two Strings
Example of Two Strings
The following gure shows an example wiring diagram with two strings of ve
Drive Enclosures in an Oracle FS System. The system is a standard, factory
conguration with one SAS HBA per Controller. In a performance system, with
Connect the Internal Cables
148