Table 14: Site preparation checklist (continued)
Check Site preparation or pre-installation planning items
❑
Determine the environmental conditions at the installation site, including
temperature and humidity. The operating environment must remain
between the operating temperatures of 41ºF —95ºF (5º— 35º Celsius) and
the relative humidity must remain between 10% and 90% non-condensing.
Operational altitude is from -200 to 10,000 feet.
❑
Ensure that the installation site provides adequate air conditioning. To
bring the room to the appropriate temperature, operate the air
conditioning system for 48 hours prior to the scheduled installation.
Unpacking logistics
❑
Do not unpack components from their original packaging until you are
ready to perform the Oracle FS System installation.
Note: Stack the boxes containing the Drive Enclosures in inverse order
with DE #1 on the top of the pile and DE #30 at the boom.
Grounding requirements
❑
Determine if all powered equipment are properly grounded for proper
operation and safety. All power distribution units, branch wiring, and
receptacles must be listed as grounding-type devices. Connect each
component and power distribution unit into reliably grounded outlets.
Caution: To reduce the risk of electric shock or damage to installed
equipment, never disable the grounding plug on any power cord.
Rack requirements
❑ Determine if the rack can support the weight load of an Oracle FS System.
❑ Determine if adequate space is available for the new racks or within
existing racks.
❑ Determine if there is adequate room in the customer provided rack for all
the Oracle FS System components.
Documentation requirements
❑
Check the Oracle FS1-2 Flash Storage System Release Notes and MyOracle
Support (MOS) (hps://support.oracle.com/) portal to see if any software
updates are available.
Oracle FS Systems: Installation Overview
29
To Next Page
Loading...
Need help?
General