PIAGGIO Beverly 300 i.e. - Electrical System Data; Frame and Suspensions Data; Brakes Data; Wheels and Tyres Data

Electrical system
ELECTRICAL SYSTEM
Specification Desc./Quantity
Starter Electric
Ignition Electronic, inductive, high efficiency ignition, integrated with the
injection system, with variable advance and separate H.V. coil.
Ignition advance Three-dimensional map managed by control unit
Spark plug NGK CR8EKB
Battery SEALED 12V / 10Ah
Generator alternating current
Frame and suspensions
WHEELS AND TYRES
Specification Desc./Quantity
Wheel rim type Light alloy wheel rims.
Front wheel rim 3.00" x 16"
Rear wheel rim 3.50" x 14"
Front tyre 110/70 - Tubeless 16" 52S or 52P
Rear tyre 140/70 - Tubeless 14" 68P or 68S
Front tyre pressure (with passenger) 2.2 bar (2.2 bar)
Rear tyre pressure (with passenger) 2.4 bar (2.6 bar)
Brakes
BRAKES
Specification
Desc./Quantity
Front brake Ø 300-mm disc brake with hydraulic control activated by han-
dlebar right-side lever.
Rear brake Ø 240-mm disc brake with hydraulic control activated by han-
dlebar left-side lever.
Wheels and tyres
WHEELS AND TYRES
Specification
Desc./Quantity
Wheel rim type Light alloy wheel rims.
Front wheel rim 3.00" x 16"
Rear wheel rim 3.50" x 14"
Front tyre 110/70 - Tubeless 16" 52S or 52P
Rear tyre 140/70 - Tubeless 14" 68P or 68S
Front tyre pressure (with passenger) 2.2 bar (2.2 bar)
Rear tyre pressure (with passenger) 2.4 bar (2.6 bar)
N.B.
CHECK AND ADJUST TYRE PRESSURE WITH TYRES AT AMBIENT TEMPERATURE. REGU-
LATE PRESSURE ACCORDING TO THE WEIGHT OF BOTH RIDER AND ACCESSORIES
Tightening Torques
STEERING
Name
Torque in Nm
Handlebar fixing screw (*) 45 to 50
Characteristics Beverly 300 i.e.
CHAR - 10