PIAGGIO Beverly 300 i.e. - Side Fairings

- Unscrew the screws fastening the footrest to the
front wheel housing;
- Use a flat headed screwdriver to remove the
plugs and the mat as indicated in the figure;
- Unscrew the three screws indicated and remove
the passenger footrest, releasing the fastener
clips.
Side fairings
Proceed as follows to remove the side fairings:
- Remove the saddle;
- Remove the rear luggage rack;
- Unscrew the two screws indicated and remove
the centre rear cover;
Beverly 300 i.e. Chassis
CHAS - 263