- Fit the lower steering bearing seat on the steering
tube.
- With a tube of the indicated sizes, fit the lower
seat until it stops. Inside Ø: 35.5 mm; Outside Ø:
38 mm; Length: 350 mm.
N.B.
LUBRICATE THE STEERING FIFTH WHEEL TRACKS WITH
RECOMMENDED GREASE BEFORE USE.
Recommended products
AGIP GREASE PV2 Ivory smooth-textured,
slightly-stringy anhydrous calcium-base
grease.
TL 9150 066, NATO G 460 symbol
Rear
Removing the rear wheel
- Remove the silencer mounting bracket;
- Retrieve the conical spacer and remove the
wheel.
Refitting the rear wheel
- Carry out the removal operations but in reverse order, observing the prescribed tightening torques.
Locking torques (N*m)
Fixing screw for wheel rim to hub 33 - 37
Swing-arm
Suspensions Beverly 300 i.e.
SUSP - 220
To Next Page
Loading...
