PIAGGIO Beverly 300 i.e. - Inspecting the Crankshaft Components; Inspecting the Crankshaft Alignment

- Unscrew the oil filter fitting if required.
- Once the crankcase halves have been separa-
ted, reach and remove the internal bulkhead and
the protection bulkhead for the mesh pre-filter.
Inspecting the crankshaft components
N.B.
TO MEASURE WEAR LIMITS AND COUPLING CLEARANCES, SEE THE SPECIFICATIONS CHAP-
TER.
See also
Crankcase - crankshaft - connecting rod
Inspecting the crankshaft alignment
N.B.
TO MEASURE WEAR LIMITS AND COUPLING CLEARANCES, SEE THE SPECIFICATIONS CHAP-
TER.
See also
Crankcase - crankshaft - connecting rod
Beverly 300 i.e. Engine
ENG - 153