PIAGGIO Beverly 300 i.e. - Engine 300 Shimming; Recommended Products Table; Units of Measure Conversion

N.B.
MEASUREMENT "A" MUST BE TAKEN WITHOUT ANY GASKET FITTED BETWEEN THE CRANK-
CASE AND CYLINDER AND AFTER RESETTING THE DIAL GAUGE, EQUIPPED WITH A SUP-
PORT, ON A GROUND PLANE
ENGINE 300 SHIMMING
Name Measure A Thickness
SHIMMING 3.70 - 3.60 0.4 ± 0.05
SHIMMING 3.60 - 3.40 0.6 ± 0.05
SHIMMING 3.40 - 3.30 0.8 ± 0.05
Products
RECOMMENDED PRODUCTS TABLE
Product Description Specifications
AGIP GEAR SAE 80W-90 Lubricant for gearboxes and transmis-
sions.
API GL-4
eni i-Ride PG 5W-40 Synthetic based lubricant for high-per-
formance four-stroke engines.
JASO MA, MA2 - API SL - ACEA A3
AGIP FILTER OIL Special product for the treatment of foam
filters.
-
AGIP GP 330 Water repellent stringy calcium spray
grease.
R.I.D./A.D.R. 2 10°b) 2 R.I.Na. 2.42 -
I.A.T.A. 2 - I.M.D.G. class 2 UN 1950
Page 9022 EM 25-89
AGIP BRAKE 4 Brake fluid. Synthetic fluid SAE J 1703 -FMVSS 116
- DOT 3/4 - ISO 4925 - CUNA NC 956
DOT 4
AGIP PERMANENT SPEZIAL Ethylene glycol-based antifreeze fluid
with organic inhibition additives. Red,
ready to use.
ASTM D 3306 - ASTM D 4656 - ASTM D
4985 - CUNA NC 956-16
UNIT OF MEASURE - CONVERSION - ENGLISH SYSTEM TO INTERNATIONAL SYSTEM (IS).
Specification
Desc./Quantity
1 Inch (in) 25.4 Millimetres (mm)
1 Foot (ft) 0.305 Metres (m)
1 Mile (mi) 1.609 Kilometres (km)
1 US gallon (USgal) 3.785 Litres (l)
1 Pound (lb) 0.454 Kilogram (kg)
1 Cubic inch (in³) 16.4 Cubic centimetres (cm³)
1 Foot pound (lb ft) 1,356 Newton meter (Nm)
1 Miles per hour (mi/h) 1.602 Kilometres per hour (km/h)
1 Pound per square inch (PSI) 0.069 (bar)
1 Fahrenheit (°F) 32+(9/5) Celsius (°C)
Beverly 300 i.e. Characteristics
CHAR - 27