PIAGGIO Beverly 300 i.e. - Levels Check, Road Test, and Static Test

- Abnormal noise
Static test
Static control after the test ride:
• Hot engine restart
• Minimum seal (turning the handlebar)
• Uniform steering rotation
• Possible losses
• electric radiator fan operation
CAUTION
CHECK AND ADJUST TYRE PRESSURE WITH TYRES AT AMBIENT TEMPERATURE.
CAUTION
NEVER EXCEED THE RECOMMENDED INFLATION PRESSURES OR TYRES MAY BURST.
Functional inspection
Functional Checks:
• Hydraulic braking system: lever travel
• Clutch: proper functioning check
• Engine: proper general functioning and no abnormal noise check
• Other: papers check, chassis and engine number check, tools and equipment, licence plate fitting,
lock check, tyre pressure check, rear-view mirror and any accessory fitting
Instruments start-up
Use the switch "MODE" to "ODO" mode
Hold the switch "MODE" for more than 3 seconds,
the hours will be displayed. Hours will increase
each time the "MODE" button is pressed.
Once the hour is adjusted, hold the switch "MODE"
more than 3 seconds to display the minutes. Mi-
nutes will increase each time the "MODE" button
is pressed.
If no key is pressed for 3 seconds, the system will
leave the clock adjustment mode.
WARNING
FOR SAFETY REASONS, CLOCK ADJUSTMENT IS POSSI-
BLE EXCLUSIVELY WITH VEHICLE SPEED EQUAL TO 0
Km/h.
Pre-delivery Beverly 300 i.e.
PRE DE - 282