1. Wash the sponge with water and mild soap.
2. Dry it with a clean cloth and short blasts of com-
pressed air.
3. Impregnate the sponge with a mixture of 50%
petrol and 50% specified oil.
4. Gently squeeze the filtering element, let it drip
dry and then refit it.
CAUTION
IF THE VEHICLE IS USED ON DUSTY ROADS IT IS NEC-
ESSARY TO CARRY OUT MAINTENANCE CHECKS OF
THE AIR FILTER MORE OFTEN TO AVOID DAMAGING THE
ENGINE.
Recommended products
AGIP FILTER OIL Special product for the treat-
ment of foam filters.
-
Engine oil
Replacement
Change oil and replace filter as indicated in the
scheduled maintenance table.
- In order to facilitate oil drainage, unscrew the cap/
dipstick «A».
Beverly 300 i.e. Maintenance
MAIN - 43
To Next Page
Loading...
