PIAGGIO Beverly 300 i.e. - Rear Brake Disc Refitting

- Remove the rear wheel.
- Act on the disc five fixing screws shown in the
picture.
See also
Removing the rear wheel
Refitting
REAR WHEEL WITH INTEGRATED HUB
For fitting, position the disc correctly using the ar-
row stamped on it as reference.
N.B.
THE ARROW STAMPED ON THE DISC INDICATING THE
RUNNING DIRECTION MUST BE FITTED TOWARDS THE
OUTSIDE OF THE VEHICLE.
- Tighten the screws to the prescribed torque and
apply the recommended product.
Recommended products
Loctite 243 Medium-strength threadlock
Medium Loctite 243 threadlock
Locking torques (N*m)
Brake disc screws 8 ÷ 10
Braking system Beverly 300 i.e.
BRAK SYS - 236