PIAGGIO Beverly 300 i.e. - Front Handlebar Cover; Headlight Assy.; Frame Central Cover

Instrument panel
- Remove the rear handlebar cover;
- Undo the fours screws indicated to remove the
assembly.
Front handlebar cover
To remove the handlebar cover, proceed as fol-
lows:
- Remove the rear handlebar cover.
- Unscrew the two screws «D» and remove the
front handlebar cover, disconnecting the front
headlight connector
See also
Rear handlebar cover
Headlight assy.
Frame central cover
- Remove the side fairings;
- Remove the footrests;
- Open the glove compartment and undo the four
screws indicated on both sides of the vehicle;
Beverly 300 i.e. Chassis
CHAS - 255