PIAGGIO Beverly 300 i.e. - Steeringh Fifth Wheel Track Refitting

- Remove the lower steering bearing seat on the
steering tube using the specific tool.
Specific tooling
020004Y Punch for removing fifth wheels from
headstock
Refitting
STEERING FIFTH WHEEL TRACK FITTING
- Thoroughly clean the track seats on the head-
stock and the steering tube.
- Fit the new tracks of the headstock with the spe-
cific tool.
- Screw the nut until the tracks are fully inserted.
N.B.
LUBRICATE THE STEERING FIFTH WHEEL TRACKS WITH
RECOMMENDED GREASE BEFORE USE.
Specific tooling
001330Y Tool for fitting steering seats
001330Y014 Tool for fitting steering seats
001330Y015 Tool for fitting steering seats
Recommended products
AGIP GREASE PV2 Ivory smooth-textured,
slightly-stringy anhydrous calcium-base
grease.
TL 9150 066, NATO G 460 symbol
Beverly 300 i.e. Suspensions
SUSP - 219