PIAGGIO Beverly 300 i.e. - License Plate Holder; Helmet Bay

License plate holder
To remove the license plate mounting, proceed as
follows:
- Remove the helmet compartment;
- Undo the three screws indicated;
- Unscrew the indicated screw and release the li-
cense plate light lamp holder.
See also
Helmet bay
Helmet bay
To remove the helmet compartment, proceed as
follows:
- Remove the side fairings;
- Pull out the battery cables and unscrew the screw
«A» and «B»;
Beverly 300 i.e. Chassis
CHAS - 265