PIAGGIO Beverly 300 i.e. - Hub Oil Replacement; Air Filter

-Screw up the oil dipstick again and make sure it
is locked properly into place.
Replacement
-Remove the oil filler cap «A».
- Unscrew the oil drainage cap «B» and drain out
all the oil.
- Screw in the drainage cap again and fill the hub
with the prescribed oil.
Recommended products
AGIP GEAR SAE 80W-90 Lubricant for gear-
boxes and transmissions.
API GL-4
Characteristic
Rear hub oil
Capacity approximately 250 cc
Locking torques (N*m)
Hub oil drainage screw 15 to 17 Nm
Air filter
To access the air filter:
- Unscrew the three screws «A» and remove the
air filter cover.
- Unscrew the other six screws «B» and remove
the air filter cover.
Maintenance Beverly 300 i.e.
MAIN - 42