- Look inside the expansion tank and check that
the level is between MIN and MAX. Top-up when
the liquid does not reach the level MIN.
If the level is not correct, proceed to top-up when
the engine is cold. If the coolant needs to be top-
ped up frequently or the expansion tank is com-
pletely dry, check the cooling system to find the
cause of the problem.
WARNING
TO AVOID THE RISK OF SCALDING, DO NOT UNSCREW
THE EXPANSION TANK COVER WHILE THE ENGINE IS
STILL HOT.
WARNING
IN ORDER TO AVOID HARMFUL FLUID LEAKS WHILE RID-
ING, IT IS IMPORTANT TO MAKE SURE THAT THE LEVEL
DOES NOT EXCEED THE REFERENCE TONGUE TOO
MUCH.
TO ENSURE CORRECT ENGINE OPERATION, KEEP THE
RADIATOR GRILLE CLEAN.
Recommended products
AGIP PERMANENT SPEZIAL Ethylene glycol-
based antifreeze fluid with organic inhibition
additives. Red, ready to use.
ASTM D 3306 - ASTM D 4656 - ASTM D 4985 -
CUNA NC 956-16
Braking system
Level check
The front and rear brake fluid reservoirs are both
positioned on the handlebar. Proceed as follows:
- Rest the vehicle onto the centre stand, with the
handlebar centred.
- Check the fluid level through the sight glass
«A».
A certain lowering of the level is caused by wear
on the brake pads.
Beverly 300 i.e. Maintenance
MAIN - 47
To Next Page
Loading...
