PIAGGIO Beverly 300 i.e. - Coolant, Fuel, and Brake Systems Disconnection

- Unscrew the screw indicated in the figure and re-
lease the rear brake hose from the silencer mount-
ing bracket;
- Unscrew the two bolts fastening the rear brake
calliper to the silencer mounting bracket;
- Working on the vehicle right side, remove the
coolant intake pipes and empty the system.
N.B.
LET THE COOLANT DRAIN INTO A CONTAINER OF ADE-
QUATE CAPACITY.
Characteristic
Cooling system fluid
~ 2 l
- Disconnect:
- fuel piping and retainer clamp.
- injector connector.
- control unit connector.
Engine from vehicle Beverly 300 i.e.
ENG VE - 104