- Remove the pin fixing the engine to the swinging
arm.
- The engine is now free.
Upon refitting the engine to the vehicle, carry out
the removal operations but in reverse order, and
respect the tightening torque shown in the «Spec-
ifications» Chapter.
- Check that there is a small clearance when the
valve is in abutment against the set screw.
- Check the engine oil level and if necessary, top
it up with the recommended type.
- Fill and bleed the cooling circuit.
- Check accelerator and electric devices for correct
functioning.
- Pay particular attention to the sleeve, be careful
to position the throttle body reference marks as in-
dicated in the picture.
CAUTION
PAY PARTICULAR ATTENTION TO POSITIONING THE
THROTTLE CONTROL TRANSMISSION PROPERLY.
Beverly 300 i.e. Engine from vehicle
ENG VE - 107
To Next Page
Loading...
