PIAGGIO Beverly 300 i.e. - Page 215

- Fit the upper steering bearing.
CAUTION
INSERT THE UPPER STEERING BEARING WITH THE
CAGE FACING UPWARDS.
- Fit the steering bearing upper seat.
- Fit the cover plate.
- Insert the lower tightening ring nut, screw until it
stops and, with the specific tool, tighten to the pre-
scribed torque.
Specific tooling
020055Y Wrench for steering tube ring nut
Locking torques (N*m)
Steering tube lower ring nut 14 - 17
Beverly 300 i.e. Suspensions
SUSP - 215