QNAP QTS 4.5 Series User Manual

Important
Connect the NAS directly to the PC using an ethernet cable in order to connect to a
wireless network enabled with captive portal.
1. Open Qfinder Pro.
2.
Locate the NAS in the list and click the unconfigured Wi-Fi icon located under the Status table
header.
3. Optional: Alternatively, select the NAS and go to Settings > Wi-Fi Settings .
The Login page opens.
4. Enter the username and password.
5. Click OK.
The Wi-Fi Connection Settings page opens.
QTS 4.5.x User Guide
Network & Virtual Switch 418

QNAP QTS 4.5 Series Specifications

General

Brand	QNAP
Model	QTS 4.5 Series
Category	Storage
Language	English