QNAP QTS 4.5 Series User Manual

Type Description
On-the-Fly Transcoding On-the-Fly Transcoding converts videos in real time as you
watch them.
Note
• You cannot specify the output format for On-
the-Fly Transcoding.
• On-the-Fly Transcoding uses more system
resources than Background Transcoding and
may affect the performance of your NAS.
Tip
You can install CodexPack to increase
transcoding speed and reduce system resource
consumption.
You can check whether your NAS supports GPU-
acclerated transcoding on the Transcoding
Settings screen. For details, see Configuring
Transcoding Resources.
Background Transcoding
The Background Transcoding tab displays the overall background transcoding status as well as additional
information about specific background transcoding tasks. You can view and manage background transcoding
tasks from this tab.
General Tasks
QTS 4.5.x User Guide
Multimedia 499

QNAP QTS 4.5 Series Specifications

General

Operating System	QTS 4.5 (Based on Linux)
File System	EXT4
Supported RAID Levels	RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking Protocols	TCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management Interface	Web-based GUI
Supported Protocols	SMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot Support	Yes
Virtualization Support	Yes
Backup Solutions	Hybrid Backup Sync
Security Features	AES 256-bit encryption, Antivirus, IP Blocking
Mobile Apps	Qfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage Capacity	Varies by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.