QNAP QTS 4.5 Series User Manual

Log Type Settings
System Access Log • Severity level
• User
• Source IP
• Connection type
• Accessed resources
• Action
6. Click Apply.
QuLog Center adds the specified log filter criteria.
Editing a Log Filter Criterion
1. Open QuLog Center.
2. Go to QuLog Service > Log Receiver > Filter Criteria .
3. Go to System Event Log or System Access Log.
4. Select a filter criteria.
5. Optional: Click Reset to clear all filter criteria settings.
6.
Click .
The Filter Criteria window appears.
7. Edit the log filter fields.
For details, see Configuring a Log Filter Criterion.
8. Click Apply.
All changes are applied.
Deleting a Log Filter Criterion
1. Open QuLog Center.
2. Go to QuLog Service > QuLog Server > Filter Criteria .
3. Select System Event Log or System Access Log.
4. Select a filter criteria.
5.
Click .
A confirmation window appears.
6. Click Yes.
Importing a Custom Filter Criterion
1. Open QuLog Center.
2. Go to QuLog Service > Log Receiver > Filter Criteria .
QTS 4.5.x User Guide
QuLog Center 525

QNAP QTS 4.5 Series Specifications

General

Brand	QNAP
Model	QTS 4.5 Series
Category	Storage
Language	English