1~50，outer vlan ID being 3 and new outer vlan ID being 100
QTECH(config-if-ethernet-0/1)#rewrite-outer-vlan 1 50 outer-vlan 3
new-outer-vlan 100
3.3.6 vlan-swap
Configure global vlan swap.
vlan-swap
no vlan-swap
vlan-swap [source vlanID] [switching vlan ID ]
【Parameter】
source vlanID：the vlan ID to be replaces in tag.
switching vlan ID: the vlan used for replacing original vlan ID.
【Command configuration mode】
Global configuration mode
【Example】
Replace vlan2 to vlan1 in tag
3-18
To Next Page
Loading...
