about all ports. If both port type and port number are specified, the command
displays information about the specified port.
【Example】
！Display the configuration information of Ethernet 0/0/1
QTECH#show interface ethernet 0/0/1
2.1.10 show statistics interface
Use show statistics interface command to display the statistic information of
specified port or all ports.
show statistics interface [ interface-num ]
【Parameter】
interface-num：Means Ethernet port. Interface-num is in the form of interface-type
+ interface-number. Interface-type is Ethernet and interface-number is
slot-num/port-num, in which slot-num is in the range of 0 to 2, and port-num is in
the range of 1 to 24.
【Command configuration mode】
2-13
To Next Page
Loading...
Need help?
General
