【Command configuration mode】
Global configuration mode
【Example】
！Configure port-car-open-time to be 10 seconds
QTECH(config)#port-car-open-time 10
2.3.3 port-car-rate
Use port-car-rate command to configure the port-car-rate. Use no port-car-rate
command to restore the default port-car-rate.
port-car-rate port-car-rate
no port-car-rate
【Parameter】
port-car-rate：Port-car-rate ranges from 1 to 2600
【Default】
Default port-car-rate is 300 packet/second
2-33
To Next Page
Loading...
